Process Water & Pollution Control Dam Lining
Lining for process ponds, return-water dams and pollution-control storage at African mines and industrial sites. Geosynthetics Africa selects, supplies, delivers and installs, with documented QA/QC, across Africa. Send your drawings and quantities for a proposal.
System Overview
Process-water and pollution-control facilities store liquids whose chemistry, temperature and operating level can differ substantially from clean water. Geosynthetics Africa supplies and installs geomembranes, protection geotextiles and specified drainage or leak-detection layers for these containment duties across Africa.
We review process chemistry, operating head, temperature, foundation conditions and the approved liner section, then schedule the barrier, protection and collection materials.
Appoint us for material supply or an integrated package. We fabricate where required, deliver across borders and install with our own crews, with inspection stages and handover records set before mobilisation.
Send your project location, drawings, quantities, operating conditions and required date. Our technical team will review the specification and prepare a proposal covering material, installation and QA/QC.
The PCD & Process Water Dam System We Build
Layer by layer, top to bottom. We supply every layer marked with a product and install the system with our own crews.
- Stored waterLoad
Process, return or contaminated stormwater
- HDPE geomembranesPrimary linerBarrier
HDPE geomembrane with factory-made pipe boots
- Leak detection drainage sheetsLeak detection layerDrainage
Drainage composite between liners, draining to a monitored sump
- Eurobent® GCLSecondary linerBarrier
HDPE or GCL, depending on the design class
- MIRAFI® nonwoven geotextilesCushionProtection
Nonwoven geotextile
- Prepared subgradeGround
Compacted, smooth and accepted by us before any layer goes down
How Geosynthetics Africa Delivers Across Africa
Appoint us for material supply or an integrated supply, delivery, installation and QA/QC package, planned around your site, specification and construction programme.
Technical Selection & Scope
We review process chemistry, operating head, temperature, foundation conditions and the approved liner section, then schedule the barrier, protection and collection materials.
Supply & Cross-Border Delivery
We schedule, pack and ship your materials, prepare the customs documents and deliver to your African project site. We confirm availability, shipment sequence and mobilisation in your proposal.
Installation & Site Controls
We deliver the material, deploy panels, complete fusion and extrusion welding, pipe boots, sumps and anchors, and tie in to operating facilities in phases.
Our QA/QC & Handover
Our lining QC records roll and panel identity, trial welds, applicable air-channel testing (ASTM D5820), vacuum testing (ASTM D5641), destructive peel/shear tests (ASTM D6392), repair close-out and penetration checks to the project plan.
Why Choose Geosynthetics Africa
Combine process-containment material supply with installation and documented seam control through one partner, with freight and site mobilisation planned around the plant construction or shutdown programme.
Discuss your project scopeProcess Water & Pollution Control Dam Lining — Key System Components
Key System Components
Specified chemical-containment geomembrane
The polymer, thickness, surface finish and seams are selected for the stored liquid, temperature and liner loading.
Protection and drainage interfaces
We use the specified cushioning, underdrainage and any leak-detection layers with defined collection points.
Penetrations and terminations
We detail pipe boots, sumps, anchors and concrete connections for liquid tightness and expected movement.
Selecting Your Process Water & Pollution Control Dam Lining System
We review representative liquid chemistry, temperature and exposure duration with the material specification.
We assess foundation settlement, groundwater uplift, hydraulic head and interface stability.
We detail sumps, pipe penetrations, monitoring points and tie-ins to existing containment.
Installation & Project Delivery
We accept the formation, drains and protection layers before deployment; isolate operating interfaces under the site work plan.
We deploy and join panels to the approved layout, recording welding settings, trial seams and detail welds.
Test, repair and retest, then release covering or filling and compile as-built panel and penetration records.
Our Process Water & Pollution Control Dam Lining QA/QC
Approved Scope & Inspection Plan
We confirm drawings, product submittals, acceptance criteria and hold points before our installation work starts.
Liquid and material compatibility
We confirm the exact membrane and ancillary materials against approved chemical-exposure requirements.
Seams, sumps and connections
We record applicable weld tests and inspect pipe boots, anchors and structural terminations.
Filling or covering release
We close repairs and complete the specified leak survey or other acceptance checks before commissioning.
Documented Handover
We compile material certificates, installation inspections, test results, repairs and as-built information for your project team.
Related Applications
Tailings Storage Facility (TSF) Lining
HDPE barrier systems for new tailings cells, raises, expansions and remediation.
Heap Leach Pad Lining
Containment, liner protection and solution collection beneath ore stacks.
Concrete Protection & Tank Lining
Anchored thermoplastic liners and fabricated details for concrete tanks, channels and chemical-exposure areas.
Technical Resources & Product Documentation
Our product systems
In-House Manufacturing & Fabrication
FlowTex
Dewatering & sand containers
Dewatering bags, tubes and woven, nonwoven and three-layer sand containers.
Explore FlowTexGeoBarrier
Mole barrier systems
Impermeable HDPE mole barrier systems.
Explore GeoBarrierSoilLock
Erosion control blankets
Jute, coir, straw and wood wool erosion control blankets.
Explore SoilLockPolyTape
Woven geotextiles & silt fences
Standard and high flow woven geotextiles up to 100 kN/m, plus reinforced and non-reinforced silt fences with selvedged edges.
Explore PolyTapeFilterDrain
Integrated drainage & filtration
Drainage pipes with factory fitted MIRAFI® S filtration and separation geotextile.
Explore FilterDrainGeoCurtain
Floating sediment barriers
Class 1–3 silt curtains and floating sediment barriers.
Explore GeoCurtainSubmit your BOQ.
Get a quote – not just a price.
Upload your BOQ or speak to our technical team for expert recommendations and support.